There are a number of buttons that can be used to
initiate or abort scanning.
- Preview button
- This button does a quick preview
scan of the scan region and displays it in the Preview tab.
If you want to preview more than one frame at a time, use
the "Device|Batch scan" option.
If you're scanning from disk,
the frame number is combined with the "Device|Disk file name" option
by incrementing the digits prior to a "+" in the file name,
or by incrementing the last digit found in the file name.
- Scan button
- This button does a scan,
displays the image in the Scan tab and optionally
saved to the file types enabled in the Files tab.
If you want to preview more than one frame at a time, use
the "Device|Batch scan" option.
If you're scanning from disk,
the frame number is combined with the "Disk file name" option
by incrementing the digits prior to a "+" in the file name,
or by incrementing the last digit found in the file name.
- Refresh button
- This button refreshes the currently
displayed image or histogram tab. It's only needed when
"Prefs|Refresh delay" is set to zero.
- Save button
- This button works the same as the
"Scan" button, except it reads the raw scan data from
the memory buffer instead of the scanner.
- Zoom In button
- This button zooms into the image in the
Preview tab, or if the Scan tab is displayed it zooms into the
image in the Scan tab. The zoom is a factor of two.
- Zoom Out button
- This button zooms out of the image in the
Preview tab, or if the Scan tab is displayed it zooms out of the
image in the Scan tab. The zoom is a factor of two.
- Abort button
- This button aborts a long-running operation,
such as scanning, cropping, or calibrating.
- Eject button
- This button ejects film from the scanner if possible. If
using an APS adapter, this rewinds the film in the cassette.
If the adapter has been ejected or rewound previously, pressing
this button again re-inserts the film.